Deck Plates & Hatches

CLASSIC HATCH LINE:

Featuring the traditional gloss finish that made us popular, our Classic Hatch Cover Line is contracted using materials which expand minimally in the sun, making them ideal for the hottest and most humid environments. These hatches provide superior protection in a variety of conditions, while ensuring your valuables remain safe and secure below deck.

PERFORMANCE HATCH LINE:

For 2013, SEA-LECT Designs new line of Performance Hatch Covers are molded in advanced materials that offer a unique combination of increased waterproofing, durability and ease of installation over other hatches on the market. Using a lightweight polymer that’s buoyant, these hatches provide ultimate versatility with a smooth satin finish, whether you’re creating a new storage compartment, or simply replacing a worn-out lid.




Will Our Hatches Fit Your Kayak?

Here at SEA-LECT Designs, we manufacture hatches designed to fit the most popular kayak hatch sizes, or the sizes that are often associated with hatches manufactured by Kajak Sport* and/or Valley Sea Kayaks*. If you boat does not have a hatch designed in these measurement, unfortunately you will need to contact your kayaks original manufacturer to see about a replacement.

HOW TO KNOW IF OUR HATCHES WILL FIT YOUR BOAT

1) Confirm your hatch attaches with an aftermarket, bolt-on and/or glue-on, mounting rim.

The mounting rim is the single most crucial part to ensuring a watertight seal – it provides standardization in sizing. In many instance, especially in the case of many plastic boats, the mounting rim is a molded-in section of the boat, interacting as a single piece with the hull. If this is the case, we’re sorry to say that more often than not our hatches won’t provide a good seal since the lip on these rims are usually too rounded to ‘click’ into place.

2) If you have a bolt-on and/or glue-on rim, find the measurements for the outside of the rim’s lip.

In the hatch descriptions above, we provide the essential measurement to determine if our hatches will fit your boat – simply measure to the outside of the rims lip, and compare (please note, the lip is the portion of the rim that sticks above the kayak, not the area that attaches to the kayak – the rims lip will be slightly narrower than the overall length/width of the hatch).

3) To order, contact your local paddlesports shop who carries SEA-LECT Designs gear!

Just provide them with the ‘Display #’ listed next to the hatch you need. Click here for our Dealer Locator!


SCREW OUT DECK PLATE w/ INTERNAL COLLAR

Injection Molded ABS

These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline and clean with hot, soapy water. Also available are 4", 5" and 6" Polyethylene rings (listed below) which can be used in making your own deck plate bags. Note: Avoid contact with acetone or strong solvents.

Bulk #
Display #
A
B
C
D
Color
Lid Color
Fastener
K337142 K337142-1 4-7/16" 5-3/4" 4-1/2" 5-1/8" White White #8 OH
K337143 K337143-1 4-7/16" 5-3/4" 4-1/2" 5-1/8" White Clear #8 OH
K337147 K337147-1 4-7/16" 5-3/4" 4-1/2" 5-1/8" Black Black #8 OH
K337148 K337148-1 4-7/16" 5-3/4" 4-1/2" 5-1/8" Black Clear #8 OH
K337152 K337152-1 5-7/16" 6-3/4" 5-1/2" 6-1/8" White White #8 OH
K337153 K337153-1 5-7/16" 6-3/4" 5-1/2" 6-1/8" White Clear #8 OH
K337157 K337157-1 5-7/16" 6-3/4" 4-1/2" 5-1/8" Black Black #8 OH
K337158 K337158-1 5-7/16" 6-3/4" 4-1/2" 5-1/8" Black Clear #8 OH
K337162 K337162-1 6-1/2" 8-1/8" 6-1/2" 7-1/4" White White #8 OH
K337163 K337163-1 6-1/2" 8-1/8" 6-1/2" 7-1/4" White Clear #8 OH
K337167 K337167-1 6-1/2" 8-1/8" 6-1/2" 7-1/4" Black Black #8 OH
K337168 K337168-1 6-1/2" 8-1/8" 6-1/2" 7-1/4" Black Clear #8 OH
K337199 K337199-1 Lid Retaining Strap - 8"
K0P33794 n/a 4" Polyethylene Ring
K0P33795 n/a 5" Polyethylene Ring



QUARTER TURN DECK PLATE

Injection Molded ABS/Polycarbonate

The SEA-LECT Designs Quarter-Turn Deck Plate is UV stabilized and features a new locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Custom color available. Patent Pending.

Bulk #
Display #
A
B
C
D
Color
Lid Texture
Fastener
K336140 K336140-1 4" 6-1/8" 4-1/2" 5-3/8" White Smooth #8 OH
K336145 K336145-1 4" 6-1/8" 4-1/2" 5-3/8" Black Smooth #8 OH
K336160 K336160-1 6" 8-1/8" 6-1/2" 7-3/8" White Smooth #8 OH
K336162 K336162-1 6" 8-1/8" 6-1/2" 7-3/8" White Textured #8 OH
K336165 K336165-1 6" 8-1/8" 6-1/2" 7-3/8" Black Smooth #8 OH
K336167 K336167-1 6" 8-1/8" 6-1/2" 7-3/8" Black Textured #8 OH
K336180 K336180-1 8" 10" 8-3/8" 9" White Smooth #8 OH
K336182 K336182-1 8" 10" 8-3/8" 9" White Textured #8 OH
K336185 K336185-1 8" 10" 8-3/8" 9" Black Smooth #8 OH
K336187 K336187-1 8" 10" 8-3/8" 9" Black Textured #8 OH

SCREW OUT DECK PLATE w/ CLEAR COVER

Injection Molded ABS/Polycarbonate

The SEA-LECT Designs Screw Out Deck Plate with clear polycarbonate lid allows visual inspection of watertight compartments without removing the lid. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline and clean with hot, soapy water. Note: Avoid contact with acetone or strong solvent.

Bulk #
Display #
A
B
C
D
Color
Fastener
K337141 K337141-1 4-7/16" 5-3/4" 4-1/2" 5-1/8" White #8 OH
K337146 K337146-1 4-7/16" 5-3/4" 4-1/2" 5-1/8" Black #8 OH
K337151 K337151-1 5-7/16" 6-3/4" 5-1/2" 6-1/8" White #8 OH
K337156 K337156-1 5-7/16" 6-3/4" 5-1/2" 6-1/8" Black #8 OH
K337161 K337161-1 6-1/2" 8-1/8" 6-1/2" 7-1/4" White #8 OH
K337166 K337166-1 6-1/2" 8-1/8" 6-1/2" 7-1/4" Black #8 OH

SCREW OUT DECK PLATE

Injection Molded ABS

SEA-LECT Designs deck plates are molded to the highest standards using top quality UV stabilizers and antioxidants. Use silicone sealant on hull or deck surface when installing the deck plate. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Note: Avoid contact with acetone or strong solvents.

Bulk #
Display #
A
B
C
D
Color
Fastener
K337140 K337140-1 4-7/16" 5-3/4" 4-1/2" 5-1/8" White #8 OH
K337145 K337145-1 4-7/16" 5-3/4" 4-1/2" 5-1/8" Black #8 OH
K337150 K337150-1 5-7/16" 6-3/4" 5-1/2" 6-1/8" White #8 OH
K337155 K337155-1 5-7/16" 6-3/4" 5-1/2" 6-1/8" Black #8 OH
K337160 K337160-1 6-1/2" 8-1/8" 6-1/2" 7-1/4" White #8 OH
K337165 K337165-1 6-1/2" 8-1/8" 6-1/2" 7-1/4" Black #8 OH

POP OUT DECK PLATE

Injection Molded ABS/Polycarbonate

SEA-LECT Designs Pop-Out Deck Plate is UV stabilized and features an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring for a watertight fit. Available with either a smooth lid or knurled non-skid lid. Custom colors available. Patent Pending.

Bulk #
Display #
A
B
C
D
Color
Lid Texture
Fastener
K336260 K336260-1 6-1/2" 8-1/8" 6-1/2" 7-3/8" White Smooth #8 OH
K336261 K336261-1 6-1/2" 8-1/8" 6-1/2" 7-3/8" White Clear #8 OH
K336262 K336262-1 6-1/2" 8-1/8" 6-1/2" 7-3/8" White Textured #8 OH
K336265 K336265-1 6-1/2" 8-1/8" 6-1/2" 7-3/8" Black Smooth #8 OH
K336266 K336266-1 6-1/2" 8-1/8" 6-1/2" 7-3/8" Black Clear #8 OH
K336267 K336267-1 6-1/2" 8-1/8" 6-1/2" 7-3/8" Black Textured #8 OH
K336267G K336267G-1 6-1/2" 8-1/8" 6-1/2" 7-3/8" Gray Textured #8 OH
K336280 K336280-1 8-1/2" 10" 8-3/8" 9" White Smooth #8 OH
K336281 K336281-1 8-1/2" 10" 8-3/8" 9" White Clear #8 OH
K336282 K336282-1 8-1/2" 10" 8-3/8" 9" White Textured #8 OH
K336285 K336285-1 8-1/2" 10" 8-3/8" 9" Black Smooth #8 OH
K336286 K336286-1 8-1/2" 10" 8-3/8" 9" Black Clear #8 OH
K336287 K336287-1 8-1/2" 10" 8-3/8" 9" Black Textured #8 OH
K336287G K336287G-1 8-1/2" 10" 8-3/8" 9" Gray Textured #8 OH

INSPECTION COVER

Injection Molded ABS

Bulk #
Display #
A
B
C
Color
Fastener
K337050 K337050-1 5-5/8" 4-1/4" 4-13/16" Black #10 OH
K337051 K337051-1 5-5/8" 4-1/4" 4-13/16" White #10 OH